Transmitters
The
Adtech Model ACT 340 AC Current/Voltage Three-Wire Transmitter
is one in a family of the Adtech 300 Series Transmitters that provide field
mounted efficiency and ease of wiring in a compact DIN package.
The ACT 340 accepts a standard AC current/voltage input and converts it to a
standard process signal output for interfacing directly with PLC's, DCS's and
process computers.
Most 300 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range is 15 to 42 VDC @ 28 mA typical.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The Adtech Model ACT 340L Low Power AC Current/Voltage
Three-Wire Transmitter (see above picture) is
one in a family of the Adtech 300L Series Low Power Transmitters that provide
field mounted efficiency and ease of wiring in a compact DIN package.
The ACT 340L accepts a standard AC current/voltage input and converts it to a
1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process
computers.
Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility
substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit
digital accuracy and include features such as wide ranging and non-interactive
zero and span controls.
The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The
Adtech Model ACT 40 AC Current/Voltage Transmitter
delivers a highly accurate isolated conversion of a standard AC signal to a
standard process current or voltage signal output with a maximum of 10 mV P/P
output ripple.
This provides a utility class instrument for the industrial and process
customer.
The most common AC current application is to measure the line current of an
induction motor as a measure of the power being delivered to the load.
Recalibration to other desired ranges is accomplished easily.
The
Adtech Model ACX 140 AC Current/Voltage Two-Wire Transmitter is
one in a family of the 100 Series Transmitters that provide a cost effective
means of solving local or remote signal conditioning applications.
The ACX 140 accepts a standard AC current/voltage input signal to provide a
standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's
and process computers.
Most 100 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls that are completely field adjustable via
front accessible, 16-position switches and multi-turn potentiometers.
The power range of 8 to 42 VDC provides valuable drive capability when used in
an I.S. application utilizing barriers.
Product Data
Bulletin
The Adtech Model ACX 141 AC Current/Voltage Two-Wire
Transmitter (see ACX140 picture) is one in a family of
the 100 Series Transmitters that provide a cost effective means of solving local
or remote signal conditioning applications.
The ACX 141 accepts a standard AC current/voltage input signal to provide a
standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's
and process computers.
A unique feature to the ACX 141 is it provides zero suppression up to 100% of
the major range selected in 16 divisions of the coarse zero adjustment switch.
Most 100 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls that are completely field adjustable via
front accessible, 16-position switches and multi-turn potentiometers.
The power range of 8 to 42 VDC provides valuable drive capability when used in
an I.S. application utilizing barriers.
Product Data
Bulletin
The
Adtech Model ACX 240 AC Current/Voltage Two-Wire Transmitter
is one in a family of the 200 Series Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The ACX 240 accepts a standard AC current/voltage input signal to provide a
standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's
and process computers.
Most 200 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range of 8 to 42 VDC provides valuable added drive capability.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The Adtech Model ECT 302 DC Powered Isolated Signal
Converter (see ACX-240 picture)
provides a user configurable solution for ground loops
and problems encountered in connecting together recorders, process control
systems, computers, DCS and PLC systems.
Another common application is to provide additional amplification or drive to a
process signal loop.
The ECT 302 accepts a DC current/voltage unipolar input and converts it to a DC
current/voltage unipolar process signal output. Most inputs and outputs are
jumper configurable.
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track
mount (Option H25) are available at no extra cost (specify).
Product Data
Bulletin
The Adtech Model ECT-302-1 DC Powered 3-Way Isolated
Bipolar Signal Converter (see ACX-240 picture)
provides a user configurable solution for ground loops
and problems encountered in connecting together recorders, process control
systems, motor control systems, computers, DCS and PLC systems.
The ECT-302-1 accepts a standard process input signal and converts it to a 0-10
VDC or 0-± 10 VDC output.
The standard response time is 150 milliseconds. Higher speed of response is
available (please consult factory).
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track
mount (Option H25) are available at no extra cost (specify).
Product Data
Bulletin
The Adtech Model ECT-302-3 DC Powered 3-Way Isolated Signal
Converter (see ACX-240 picture)
provides a user configurable solution for ground loops
and problems encountered in connecting together recorders, process control
systems, computers, DCS and PLC systems.
The ECT-302-3 accepts a standard process input signal and converts it to either
a true current source process signal of 4-20 mA or 1-5 VDC output signal.
The input, output and power supplies are mutually isolated to 600 VAC or 1,000
VDC peak minimums.
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track
mount (Option H25) are available at no extra cost (specify).
Product Data
Bulletin
The
Adtech Model FDT 150 Isolated Frequency to DC Transmitter provides
a highly accurate conversion of a frequency or pulse rate input to any standard
process signal output.
The FDT 150 accepts its input from a turbine meter, positive displacement meter
pick-up, contact closure, proximity switch, magnetic shaft speed pick-up and
other frequency generating devices.
Standard features include both hysteresis and sensitivity adjustments for noise
rejection using multiturn potentiometers.
Recalibration to other ranges is accomplished easily.
The
Adtech Model FDT 350 Isolated Frequency Three-Wire Transmitter is
one in a family of the 300 Series Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The FDT 350 accepts a frequency or pulse rate input and converts it to a
standard process signal output for interfacing directly with PLC's, DCS's and
process computers.
Most 300 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range is 15 to 42 VDC @ 28 mA typical.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The Adtech Model FDT 350L Low Power Isolated Frequency
Three-Wire Transmitter (see FDT-350 picture) is one in
a family of the 300L Series Low Power Transmitters that provide mounting
efficiency and ease of wiring in a compact DIN package.
The FDT 350L accepts a frequency or pulse rate input and converts it to a 1-5
VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process
computers.
Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility
substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit
digital accuracy and include features such as wide ranging and non-interactive
zero and span controls.
The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The
Adtech Model FDX 150 Isolated Frequency Two-Wire Transmitter is
one in a family of the 100 Series Transmitters that provide a cost effective
means of solving local or remote signal conditioning applications.
The FDX 150 accepts a frequency or pulse rate input to provide a standard 4-20
mA two-wire loop output for interfacing directly with PLC's, DCS's and process
computers.
Most 100 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls that are completely field adjustable via
front accessible, 16-position switches and multi-turn potentiometers.
The power range of 8 to 42 VDC provides valuable drive capability when used in
an I.S. application utilizing barriers.
Product Data
Bulletin
The
Adtech Model FDX 250 Isolated Frequency Two-Wire Transmitter
is one in a family of the 200 Series Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The FDX 250 accepts a frequency or pulse rate input to provide a standard 4-20
mA two-wire loop output for interfacing directly with PLC's, DCS's and process
computers.
Most 200 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range of 8 to 42 VDC provides valuable added drive capability.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The
Adtech Model MPF 650 Isolated Frequency to DC Transmitter
converts absolute frequency or deviation of frequency into a linear DC signal
such as 4-20 mA. It accepts a periodic waveform from a variety of primary
sensors such as turbine meters, positive displacement meter contacts or a
magnetic pick-up and computes absolute frequency.
The MPF 650 has measurement techniques that produce essentially no ripple (less
than 0.02% of range maximum), which eliminates aliasing problems.
The MPF 650 provides +12 VDC at 35 mA to power the sensor when specifying option
O65. The use of this option will, however, negate the input to output isolation.
The output is a true current/voltage source.
The
Adtech Model MVT 06 Non-Isolated Millivolt Transmitter provides
a highly accurate conversion of a DC millivolt signal to a standard process
current or voltage signal output with a maximum of 10 mV P/P output ripple. This
provides a convenient means of interfacing low-level signals to a computer
system or other process instrumentation for improved resolution.
Typical applications include analyzer outputs, other instruments and general
sensor output conditioning.
Recalibration to other desired ranges is accomplished easily.
The Adtech Model MVT 26 Isolated Millivolt Transmitter
(see MVT-06 for picture) provides a highly accurate conversion of a DC millivolt
signals to a standard process current or voltage signal output with a maximum of
10 mV P/P output ripple.
Many instrumentation applications dictate input/output isolation to eliminate
the elusive nature of ground loops or the conditioning of a millivolt signal
riding on high common mode AC or DC voltages commonly found in motor current
measurements.
Other applications include analyzer outputs, differential thermocouple
measurement and general sensor output conditioning.
Recalibration to other desired ranges is accomplished easily.
The
ADTECH Model MVT 306 Non-Isolated Millivolt Three-Wire Transmitter
is one in a family of the 300 Series Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The MVT 306 accepts a millivolt input span of 0.5-100 mV and converts it to a
standard process signal output for interfacing directly with PLC's, DCS's and
process computers.
Most 300 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range is 15 to 42 VDC @ 28 mA typical.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The Adtech Model MVT 306L Low Power Non-Isolated Millivolt
Three-Wire Transmitter (see MVT-306 picture) is one in
a family of the 300L Series Low Power Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The MVT 306L accepts a millivolt input span of 0.5-100 mV and converts it to a
1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process
computers.
Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility
substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit
digital accuracy and include features such as wide ranging and non-interactive
zero and span controls.
The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The
ADTECH Model MVT 326 Isolated Millivolt Three-Wire Transmitter is
one in a family of the 300 Series Transmitters that provide field mounted
efficiency and ease of wiring in a compact DIN package.
The MVT 326 accepts a millivolt input span of 0.5-100 mV and converts it to a
standard process signal output for interfacing directly with PLC's, DCS's and
process computers.
Most 300 Series units provide independent linearity equivalent to 14-bit digital
accuracy and include user-friendly features such as wide ranging and
non-interactive zero and span controls.
The power range is 15 to 42 VDC @ 28 mA typical.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
The Adtech Model MVT 326L Low Power Non-Isolated Millivolt
Three-Wire Transmitter (see MVT-326 picture) is
one in a family of the 300L Series Low Power Transmitters that provide field
mounted efficiency and ease of wiring in a compact DIN package.
The MVT 326L accepts a millivolt input span of 0.5-100 mV and converts it to a
1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process
computers.
Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility
substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit
digital accuracy and include features such as wide ranging and non-interactive
zero and span controls.
The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.
Surface mount (Option H26) or snap track mount (Option H25) are available at no
extra cost (specify).
Product Data
Bulletin
Back to Main