Franklyn W. Kirk Company   Distributors of Process Control Equipment for Industry and Science - Gauges, Transducers, Switches, Meters, and Flow Alarms: Call 1-800-831-1250
Manufacturers / Products
Adtech
Balmac, Inc.
Raytek
Solon
UGSI Chemical Feed
WIKA Instruments

Coriolis Flow Meters

Description

Hand held infrared non-contact thermometers

Magnetic Flow Meters

Picture for Smart Measurement

Thermal Flow Meters

Ultrasonic Flow Meters

Vortex Flow Meters

 

 

Adtech - industrial instruments and measurement solutions
ADTECH - Analog Digital Technology, Inc.
Instrumentation and Measurement Solutions

Adtech Model ACT 340 AC Current/Voltage Three-Wire TransmitterThe Adtech Model ACT 340 AC Current/Voltage Three-Wire Transmitter is one in a family of the Adtech 300 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The ACT 340 accepts a standard AC current/voltage input and converts it to a standard process signal output for interfacing directly with PLC's, DCS's and process computers.

Most 300 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range is 15 to 42 VDC @ 28 mA typical.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ACT 340 Product Data Bulletin (194Kb - PDF)

The Adtech Model ACT 340L Low Power AC Current/Voltage Three-Wire Transmitter  (see above picture) is one in a family of the Adtech 300L Series Low Power Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The ACT 340L accepts a standard AC current/voltage input and converts it to a 1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process computers.

Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit digital accuracy and include features such as wide ranging and non-interactive zero and span controls.

The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ACT 340L Product Data Bulletin (164Kb - PDF)

Back to Top

Adtech Model ACT 40 AC Current/Voltage TransmitterThe Adtech Model ACT 40 AC Current/Voltage Transmitter delivers a highly accurate isolated conversion of a standard AC signal to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.

This provides a utility class instrument for the industrial and process customer.

The most common AC current application is to measure the line current of an induction motor as a measure of the power being delivered to the load.

Recalibration to other desired ranges is accomplished easily.

Model ACT 40 Product Data Bulletin (45Kb - PDF)

Back to Top

Adtech Model ACX 140 AC Current/Voltage Two-Wire TransmitterThe Adtech Model ACX 140 AC Current/Voltage Two-Wire Transmitter is one in a family of the 100 Series Transmitters that provide a cost effective means of solving local or remote signal conditioning applications.

The ACX 140 accepts a standard AC current/voltage input signal to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.

Most 100 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls that are completely field adjustable via front accessible, 16-position switches and multi-turn potentiometers.

The power range of 8 to 42 VDC provides valuable drive capability when used in an I.S. application utilizing barriers.

Model ACX 140 Product Data Bulletin (132Kb - PDF)

The Adtech Model ACX 141 AC Current/Voltage Two-Wire Transmitter (see ACX140 picture) is one in a family of the 100 Series Transmitters that provide a cost effective means of solving local or remote signal conditioning applications.

The ACX 141 accepts a standard AC current/voltage input signal to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.

A unique feature to the ACX 141 is it provides zero suppression up to 100% of the major range selected in 16 divisions of the coarse zero adjustment switch.

Most 100 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls that are completely field adjustable via front accessible, 16-position switches and multi-turn potentiometers.

The power range of 8 to 42 VDC provides valuable drive capability when used in an I.S. application utilizing barriers.

Model ACX 141 Product Data Bulletin (132Kb - PDF)

Back to Top

Adtech Model ACX 240 AC Current/Voltage Two-Wire TransmitterThe Adtech Model ACX 240 AC Current/Voltage Two-Wire Transmitter is one in a family of the 200 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The ACX 240 accepts a standard AC current/voltage input signal to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.

Most 200 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range of 8 to 42 VDC provides valuable added drive capability.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ACX 240 Product Data Bulletin (174Kb - PDF)

The Adtech Model ECT 302 DC Powered Isolated Signal Converter (see ACX-240 picture) provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.

Another common application is to provide additional amplification or drive to a process signal loop.

The ECT 302 accepts a DC current/voltage unipolar input and converts it to a DC current/voltage unipolar process signal output. Most inputs and outputs are jumper configurable.

DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ECT 302 Product Data Bulletin (44Kb - PDF)

The Adtech Model ECT-302-1 DC Powered 3-Way Isolated Bipolar Signal Converter (see ACX-240 picture) provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, motor control systems, computers, DCS and PLC systems.

The ECT-302-1 accepts a standard process input signal and converts it to a 0-10 VDC or 0- 10 VDC output.

The standard response time is 150 milliseconds. Higher speed of response is available (please consult factory).

DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ECT 302-1 Product Data Bulletin (41Kb - PDF)

The Adtech Model ECT-302-3 DC Powered 3-Way Isolated Signal Converter (see ACX-240 picture) provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.

The ECT-302-3 accepts a standard process input signal and converts it to either a true current source process signal of 4-20 mA or 1-5 VDC output signal.

The input, output and power supplies are mutually isolated to 600 VAC or 1,000 VDC peak minimums.

DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model ECT 302-3 Product Data Bulletin (44Kb - PDF)

Back to Top

Adtech Model FDT 150 Isolated Frequency to DC TransmitterThe Adtech Model FDT 150 Isolated Frequency to DC Transmitter provides a highly accurate conversion of a frequency or pulse rate input to any standard process signal output.

The FDT 150 accepts its input from a turbine meter, positive displacement meter pick-up, contact closure, proximity switch, magnetic shaft speed pick-up and other frequency generating devices.

Standard features include both hysteresis and sensitivity adjustments for noise rejection using multiturn potentiometers.

Recalibration to other ranges is accomplished easily.

Back to Top

Adtech Model FDT 350 Isolated Frequency Three-Wire TransmitterThe Adtech Model FDT 350 Isolated Frequency Three-Wire Transmitter is one in a family of the 300 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The FDT 350 accepts a frequency or pulse rate input and converts it to a standard process signal output for interfacing directly with PLC's, DCS's and process computers.

Most 300 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range is 15 to 42 VDC @ 28 mA typical.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model FDT 350 Product Data Bulletin (194Kb - PDF)

The Adtech Model FDT 350L Low Power Isolated Frequency Three-Wire Transmitter (see FDT-350 picture) is one in a family of the 300L Series Low Power Transmitters that provide mounting efficiency and ease of wiring in a compact DIN package.

The FDT 350L accepts a frequency or pulse rate input and converts it to a 1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process computers.

Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility substations are a few typical applications.

Most 300L Series units provide independent linearity equivalent to 14-bit digital accuracy and include features such as wide ranging and non-interactive zero and span controls.

The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model FDT 350L Product Data Bulletin (164Kb - PDF)

Back to Top

Adtech Model FDX 150 Isolated Frequency Two-Wire Transmitter

The Adtech Model FDX 150 Isolated Frequency Two-Wire Transmitter is one in a family of the 100 Series Transmitters that provide a cost effective means of solving local or remote signal conditioning applications.

The FDX 150 accepts a frequency or pulse rate input to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.

Most 100 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls that are completely field adjustable via front accessible, 16-position switches and multi-turn potentiometers.

The power range of 8 to 42 VDC provides valuable drive capability when used in an I.S. application utilizing barriers.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model FDX 150 Product Data Bulletin (132Kb - PDF)

Back to Top

Adtech Model FDX 250 Isolated Frequency Two-Wire Transmitter

The Adtech Model FDX 250 Isolated Frequency Two-Wire Transmitter is one in a family of the 200 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The FDX 250 accepts a frequency or pulse rate input to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.

Most 200 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range of 8 to 42 VDC provides valuable added drive capability.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model FDX 250 Product Data Bulletin (174Kb - PDF)

Back to Top

Adtech Model MPF 650 Isolated Frequency to DC Transmitter

The Adtech Model MPF 650 Isolated Frequency to DC Transmitter converts absolute frequency or deviation of frequency into a linear DC signal such as 4-20 mA. It accepts a periodic waveform from a variety of primary sensors such as turbine meters, positive displacement meter contacts or a magnetic pick-up and computes absolute frequency.

The MPF 650 has measurement techniques that produce essentially no ripple (less than 0.02% of range maximum), which eliminates aliasing problems.

The MPF 650 provides +12 VDC at 35 mA to power the sensor when specifying option O65. The use of this option will, however, negate the input to output isolation.

The output is a true current/voltage source.

Back to Top

Adtech Model MVT 06 Non-Isolated Millivolt Transmitter

The Adtech Model MVT 06 Non-Isolated Millivolt Transmitter provides a highly accurate conversion of a DC millivolt signal to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple. This provides a convenient means of interfacing low-level signals to a computer system or other process instrumentation for improved resolution.

Typical applications include analyzer outputs, other instruments and general sensor output conditioning.

Recalibration to other desired ranges is accomplished easily.

The Adtech Model MVT 26 Isolated Millivolt Transmitter  (see MVT-06 for picture) provides a highly accurate conversion of a DC millivolt signals to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.

Many instrumentation applications dictate input/output isolation to eliminate the elusive nature of ground loops or the conditioning of a millivolt signal riding on high common mode AC or DC voltages commonly found in motor current measurements.

Other applications include analyzer outputs, differential thermocouple measurement and general sensor output conditioning.

Recalibration to other desired ranges is accomplished easily.

Back to Top

ADTECH Model MVT 306 Non-Isolated Millivolt Three-Wire Transmitter

The ADTECH Model MVT 306 Non-Isolated Millivolt Three-Wire Transmitter is one in a family of the 300 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The MVT 306 accepts a millivolt input span of 0.5-100 mV and converts it to a standard process signal output for interfacing directly with PLC's, DCS's and process computers.

Most 300 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range is 15 to 42 VDC @ 28 mA typical.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model MVT 306 Product Data Bulletin (194Kb - PDF)

The Adtech Model MVT 306L Low Power Non-Isolated Millivolt Three-Wire Transmitter (see MVT-306 picture) is one in a family of the 300L Series Low Power Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The MVT 306L accepts a millivolt input span of 0.5-100 mV and converts it to a 1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process computers.

Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility substations are a few typical applications.

Most 300L Series units provide independent linearity equivalent to 14-bit digital accuracy and include features such as wide ranging and non-interactive zero and span controls.

The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model MVT 306L Product Data Bulletin (164Kb - PDF)

Back to Top

ADTECH Model MVT 326 Non-Isolated Millivolt Three-Wire Transmitter

The ADTECH Model MVT 326 Isolated Millivolt Three-Wire Transmitter is one in a family of the 300 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The MVT 326 accepts a millivolt input span of 0.5-100 mV and converts it to a standard process signal output for interfacing directly with PLC's, DCS's and process computers.

Most 300 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user-friendly features such as wide ranging and non-interactive zero and span controls.

The power range is 15 to 42 VDC @ 28 mA typical.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model MVT 326 Product Data Bulletin (194Kb - PDF)

The Adtech Model MVT 326L Low Power Non-Isolated Millivolt Three-Wire Transmitter (see MVT-326 picture)  is one in a family of the 300L Series Low Power Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.

The MVT 326L accepts a millivolt input span of 0.5-100 mV and converts it to a 1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process computers.

Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility substations are a few typical applications.

Most 300L Series units provide independent linearity equivalent to 14-bit digital accuracy and include features such as wide ranging and non-interactive zero and span controls.

The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption.

Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).

Model MVT 326L Product Data Bulletin (164Kb - PDF)

Back to Top

Site created by ThomasNet Web Solutions, a division of ThomasNet.com